HGH45CA HIWIN Block-manufacture,factory,supplier from China

What is hot installation of machine tool bearings? How should we heat up the bearings of machine tools? Machine tool bearing hot installation generally refers to a heating process that involves installing the inner trap of the bearing onto the bearing block of the transmission shaft, and is divided into two processing processes: hot installation (or hot installation) and cold installation.

1. How to distinguish between heavy bearings and light bearingsActually, these differences are very obvious. Firstly, there is a difference in quality, which is mainly caused by two differences. The first difference is that in many cases, the material of lightweight bearings is different from that of heavy-duty bearings. You must understand this. In order to meet different industrial production or processing needs, bearings must have different performance. The different materials of various bearings are actually due to this reason.Another point is the difference in physical structure.

The accuracy of industrial robots is a key factor directly related to product quality and production efficiency. Bearings are an important factor affecting the accuracy of industrial robots, and industrial robot bearings are required to have long lifespan, high stiffness, and low friction.Therefore, when selecting industrial robots, not only should their dynamic rated load be considered, but also the suitable values for each structural parameter should be carefully selected. The development of contemporary industrial robots is characterized by their lightweight and thinness.

The 2nd Hangzhou Auto Parts Expo was grandly opened in Zhejiang from March 29th to March 31st, with nine special zones set up, attracting a large number of customers from home and abroad.1、 Automotive Parts ZoneAutomotive components and assemblies: engine system, braking system, body/chassis system, air conditioning system, standard parts, vulnerable parts2、 Automotive Supplies and Modification ZoneOn board electronic appliances, pendant, car perfume, wiper LED、 Seat cushion, foot pad, interior kit upgrade, vehicle modification parts, power modification parts3、 Motorcycle Parts ZoneEngine comp

1、 What is bearing chamfer?Chamfer is a term used in mechanical engineering. In order to remove burrs caused by machining on parts and to facilitate assembly, chamfers are generally made at the ends of parts. Chamfering can be seen everywhere in our daily lives, on the borders of mobile phones, on tempered doors, on vases, and so on.The general purpose of chamfering is to remove burrs and make it aesthetically pleasing.

Herzogenaurach | October 2, 2024 | On October 1, 2024, Schaeffler Group successfully completed the merger of Weipai Technology Group. The merger will be registered for business on the same day, marking the official effectiveness of the merger between the two parties. At the same time, all non voting ordinary shares of Schaeffler have been converted into fully voting ordinary shares.

Cast iron bearing seatAdvantages:Low cost: Cast iron materials are relatively inexpensive and suitable for situations with limited budgets.High hardness: In ordinary cutting processes, the hard and brittle nature of cast iron makes cutting easier.Suitable for low-speed, light load, and situations that do not require high-precision operation: The brittleness of cast iron may cause it to fracture when impacted, making it unsuitable for high-speed or heavy-duty environments.Disadvantages:Poor toughness: prone to rupture under heavy loads or high-speed operation.Not suitable for harsh environments

As the world's largest automotive industry chain exhibition, the 2024 Frankfurt Shanghai Auto Parts Exhibition grandly opened at the China National Exhibition Center today (December 2). The exhibition gathers rich resources from the global automotive industry chain, providing an efficient service platform for information exchange, industry promotion, and business services for participants at home and abroad.The 2024 Frankfurt Shanghai Auto Parts Exhibition covers an area of 350000 square meters and gathers more than 6700 exhibiting companies from around the world.

1. Is the outer packaging clearIn general, legitimate brands have their own dedicated designers to design the external packaging and arrange factories with qualified production conditions for production. Therefore, the packaging is very clear and unambiguous from lines to color blocks.2. Is the steel stamp clearThe brand name, number, etc. will be printed on the imported bearing body of FAG. The font is very small, but most of the products produced by the factory use steel stamping technology and are pressed before being overheated.

The 19th International Machine Tool, Sheet Metal Processing Machine Tool, Tool Holder Cutting Tool, Quality Control Measurement System, CAD/CAM, PLM Software and Production Technology Exhibition of MAKTEK Eurasia 2024 is eagerly awaited by the manufacturing and machine tool industries.