HIWIN HGH20CA-manufacture,factory,supplier from China

The Chinese Lunar New Year has ended with the sound of firecrackers,and factories have started construction one after another.In the new year,hope everyone has a wide range of financial resources. We will continue to work together and create excellent results. 

SFC bearings are a Chinese brand. Since 2003, SFC bearings have played an active and important role in the aerospace, automotive and industrial fields, covering applications in production machinery, power transmission and railways, heavy industry and consumer goods industries.

The high-temperature bearing needs to be replaced and new high-temperature lubricating grease needs to be added. However, this lubricating grease needs to be added just right, whether it's too much or too little won't work. How much does it need to be added specifically?What is the problem with adding too much lubricating grease to high-temperature bearings?Adding too much high-temperature lubricating grease can cause damage to the bearings.(1) Adding too much lubricating grease will increase the friction torque.

SFC Bearing wishes you all a happy Mid-Autumn festival and National Day.From 2023.9.29-10.2 is a double  holiday.The sales department has started work.Welcome  to our inquiry.Email:sfcbearings1@gmail.com          sfcbearing@gmail.com

When replacing peripheral parts of the device, carry out regular maintenance, operational checks and inspections of the removed bearings to determine whether they can be reused and whether they are in good or bad condition.First, carefully examine and note the removed bearings and their appearance. To clarify and check the amount of residual grease, the bearings must be thoroughly cleaned&nbs

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

SFC Bearings Provide Optimized Services For Customers. SFC serious bearings use  unique heat treatment technology to fully utilize the characteristics of these highly pure steels. This unique heat treatment technology optimizes the wear resistance characteristics of SFC bearings without affecting their stability at high temperatures.

Correct installation of bearings has a direct impact on their precision, durability, efficiency and other aspects.

When removing the bearings for inspection, first use photography and other methods to make a good appearance record. In addition, it is necessary to confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearings.a、 The cleaning of bearings can be divided into rough cleaning and fine cleaning, and a metal mesh frame can be placed at the bottom of the container used.b、 When rough washing, use a brush or other tool to remove lubricating grease or adhesive in oil.

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.